PROJ-FILE-FMT=2            

PROJ-NAME='Optoma EP757'    
PROJ-DRIVER-REV='Rev C' ; Rev C - no material changes from Rev C, incremented revision for Application Note format update -- BT 02.05.09

DOC-REV-USER-MESSAGE['Rev C'] = "7.2.03 - WARNING: SP Controls does NOT recommend the use of this projector. The Optoma EP757 employs auto synchronization to find a source to display. This may cause the source displayed to be different than the source selected. As of current there is no way to disable this functionality. To prevent this type of behavior: Use four sources with this projector. Be sure that the signals are active. This will ensure that the projector will only switch to the specified source."

IR-TIME-0L=1.315m
IR-TIME-0H=420u			 
IR-TIME-1L=315u
IR-TIME-1H=695u

CODE-SUBST[PREAMBLE]="%010"	;

PROJ-BAUD-RATE=9600,8,N,1

VOL-MUTE=0
VOL-RANGE=100
VOL-FLOOR=0

; CODE FLAGS
;	 RSCODE='...'				
;  	 REPEATS=X 		 			OPTIONAL, default = 0 = REPEAT ON KEYDOWN - NOT WORK FOR VOLUME
;    IS-SELECTION 				OPTIONAL, allows code to be used in selection pull down
;    IS-HIDDEN 					OPTIONAL, allows code to be used in hidden function pull down
;    USEREPEAT                  OPTIONAL, attaches repeat code to string (deprecated)
;	 USEPREFIX           		OPTIONAL, attaches suffix code to string (deprecated)
;    USESUFFIX					OPTIONAL, attaches prefix code to string (deprecated)
;	 INCLUDECONT				OPTIONAL, include continuations in repetitions
;	 CONTINUE='X'				OPTIONAL, continuation code
; VALUES (mutually exclusive)
;	 RS232="..."				RS232 CODE 
;	 IR="..."					IR CODE

RSCODE['COMPOSITE VIDEO'] ="'* 0 IR 019',13,10",					IS-SELECTION
RSCODE['COMPONENT VIDEO'] ="'* 0 IR 020',13,10",					IS-SELECTION
RSCODE['S-VIDEO'] 		  ="'* 0 IR 018',13,10",					IS-SELECTION
RSCODE['HDTV']            ="'* 0 IR 017',13,10",					IS-SELECTION
RSCODE['ANALOG RGB']      ="'* 0 IR 015',13,10",					IS-SELECTION
RSCODE['DIGITAL RGB']     ="'* 0 IR 016',13,10",					IS-SELECTION
RSCODE['PC']		      ="'* 0 IR 003',13,10",					IS-SELECTION
RSCODE['POWER ON']		  ="'OKOKOKOKOK',13,10"				
RSCODE['POWER OFF']		  ="'* 0 IR 002',13,10", REPEATS=2
RSCODE['VOLUME +']		  ="'* 0 IR 023',13,10"
RSCODE['VOLUME -']        ="'* 0 IR 024',13,10"
RSCODE['POWER POLL']	  ="'* 0 Lamp ?',13,10"
IRCODE['REPEAT']		  =""
RSCODE['MENU'] 			  ="'* 0 IR 008',13,10",					IS-HIDDEN
RSCODE['UP']              ="'* 0 IR 009',13,10",					IS-HIDDEN
RSCODE['DOWN']            ="'* 0 IR 010',13,10",					IS-HIDDEN
RSCODE['LEFT']            ="'* 0 IR 012',13,10",					IS-HIDDEN
RSCODE['RIGHT']           ="'* 0 IR 011',13,10",					IS-HIDDEN
RSCODE['ENTER']           ="'* 0 IR 013',13,10",					IS-HIDDEN
RSCODE['FREEZE']          ="'* 0 IR 007',13,10",					IS-HIDDEN
RSCODE['MUTE']            ="'* 0 IR 006',13,10",					IS-HIDDEN
RSCODE['ZOOM']            ="'* 0 IR 005',13,10",					IS-HIDDEN
RSCODE['KEYSTONE']        ="'* 0 IR 004',13,10",					IS-HIDDEN
RSCODE['BRIGHTNESS']      ="'* 0 IR 025',13,10",					IS-HIDDEN
RSCODE['CONTRAST']        ="'* 0 IR 026',13,10",					IS-HIDDEN

; POWER Polling Section MANDATORY IF 

POWER-POLL-INTERVAL=1s				; FREQUENCY
POWER-POLL-TIMEOUT=6s				; TIME TO WAIT FOR RESPONSE - TIMEOUT = FAIL (>0)
POWER-POLL-THRESHOLD=5				; NUMBER OF FAILURE BEFORE ASSERING POWER FAIL
POWER-POLL-STARTBYTE=1				; BYTE TO TEST
POWER-POLL-MATCH-ANY=FALSE 			; 
POWER-POLL-MATCH-BYTES="$52"		; 16 MAX ALLOWED
POWER-POLL-DURING-WARMUP=FALSE
POWER-POLL-DURING-LOCKOUT=FALSE
;POWER-POLL-TESTBYTE-MASK=$01		; SET TO FF IF NOT USED

; MANDATORY 

WARM-UP-DELAY=61s 						; TIME TO TURN ON WARM UP LIGHT COSMETIC ONLY
POWER-ON-DELAY=60s 						; RESORTATION OF SELECTION
DEFAULT-LOCKOUT=65s						; 
IO-DOWNTIME=1s 							; 29MS PER BIT
IO-CANCEL-DOWNTIME-ON-RX=FALSE			; 
USE-MODULATION-WHEN-WIRED=FALSE 		;
INVERT-LINE-WHEN-WIRED=TRUE	        	;
CARRIER-PERIOD=25u						; 
CARRIER-DUTY-CYCLE=50					; DEFAULTS TO 50%
PROJ-USES-ABSOLUTE-VOL=FALSE 
IR-WIRING-OPTIONS=IR-Emitter
POWER-SENSE-OPTIONS=RS232Poll,SENSOR,NONE
PROJ-MISSING-THRESHOLD=5          ; NUMBER OF TIMEOUTS - ONLY USED WHEN PROJ IS POLLING AND TELLS 1 - 255
ROOM-POWER-SENSE-SELECTED=RS232Poll
; FIRMWARE FOIBLES
BYTES-TO-QUEUE=2                        ; 

; MANDATORY Section for setting the defaults of the CORE functions

DEFAULT-CORE-FUNCT[ON]		='POWER ON'               	; MANDATORY
DEFAULT-CORE-FUNCT[OFF]		='POWER OFF'               	; MANDATORY
DEFAULT-CORE-FUNCT[POLL]	='POWER POLL'              	; MANDATORY
DEFAULT-CORE-FUNCT[VUP]		='VOLUME +'              		; MANDATORY
DEFAULT-CORE-FUNCT[VDN]		='VOLUME -'              		; MANDATORY
DEFAULT-CORE-FUNCT[REPEAT]	='REPEAT'					; OPTIONAL
;DEFAULT-CORE-FUNCT[PREFIX]	=''							; OPTIONAL
;DEFAULT-CORE-FUNCT[SUFFIX]	=''							; OPTIONAL

DEFAULT-HID-FUNCT[OFF]		='MENU'						; OPTIONAL
DEFAULT-HID-FUNCT[VUP]		='UP'					; OPTIONAL
DEFAULT-HID-FUNCT[VDN]		='DOWN'					; OPTIONAL
DEFAULT-HID-FUNCT[1]		='ENTER'						; OPTIONAL
DEFAULT-HID-FUNCT[2]		='MUTE'					; OPTIONAL
DEFAULT-HID-FUNCT[3]		='LEFT'					; OPTIONAL
DEFAULT-HID-FUNCT[4]		='RIGHT'				; OPTIONA
; MANDATORY Section for setting the defaults of the selections

DEFAULT-SELECTION[1]		='COMPOSITE VIDEO'					; MANDATORY
DEFAULT-SELECTION[2]		='S-VIDEO'				 	; MANDATORY
DEFAULT-SELECTION[3]		='ANALOG RGB'						; MANDATORY
DEFAULT-SELECTION[4]		='PC'						; MANDATORY

; Documentation Section

DOC-PROJ-232-CONNECTOR=DB9F 
DOC-PROJ-232-WIRING[2]=RX
DOC-PROJ-232-WIRING[3]=TX
DOC-PROJ-232-WIRING[5]=GND